Sunday, August 3, 2014

Turn Signal Switch:Take 2

    Just a quick update on the switch. I traced down the turn signal indicator wires in the Kwik wiring harness. I found one wire for each side (left & right). The aftermarket switch needs intermittent power from one source so I tied the two (left/right) together and hooked those up to the switch .... worked like a charm!




I can see right now I am going to have to reroute the way all of the wiring under the dash is. I want it a bit neater. That's going to be a day job at the least!

Saturday, August 2, 2014

More Lights and a Flasher!

    I finished cleaning up the front running lights and installed them back in the grill.






Then I decided to work on the turn signals. I know I said I wasn't going to while the car was on stands but I was careful and took my time.
    It turned out to be fairly simple but not without issues. My first attempt gave me turn signals and flashers in the front but only flashers in the rear. It didn't matter whether I was flipping the turn signals or the flasher I got flashers (both lights) LOL
    So I took up the trunk carpet and unwrapped all of the wiring and found that the wire coming from the brake switch was tapped into both turn signal wires. I cut that out and while I was at it, I had a color issue that was only hurting my brain, so I fixed that. On the driver side the pigtails coming off of the socket had a brown for turn signal and a turn signal(blue) for tail lights. So I cut the blue wire and pulled it out of the socket. I soldered the contact to a new yellow wire to match the wire coming from the front for that sides turn signal. Then I cut the brown wire and pulled it out of the socket and put it back in the other hole. Then the yellow went in its proper space. not only does this look better, it also makes trouble shooting easier in the future.
    All that was left was to run a wire from the brake switch to the wire on the turn signal switch. Everything works great except .... The indicator lights on the switch stay on all the time. I am not sure why. So for now I ungrounded the switch so they would not come on at all. The main thing is the car now has turn signals!


Still waiting on that idler arm dag nabbit!



Friday, August 1, 2014

Just Can't Leave Well Enough Alone!

    Still waiting on the idler arm from out West so I figured I would tinker with a few odds and ends.

    I ordered the knobs that were missing from the dash when I ordered some tie rod end boots and drag link boots from Eckler's. So, I started the day putting those on. For the throttle knob I had to find/make a shaft to mount the knob on. All that was there was the chrome bevel and the cable sheath. I had a grab tool laying around that worked perfectly for a replacement. After taking that apart and slipping the knob on, I inserted it in the hole and that was that. Later I can put the knob on a new cable assemble and use it for a hood release of something.
    Then I had to replace the wiper knob. This too was missing but the rest of the components were there as far as I can tell. The problem I had with this knob was that the hole was for a small shaft and the piece coming out of the dash was about a quarter inch diameter give or take. So I had to drill out the new knob to fit. This was fairly simple and my fears of messing up the new knob were unfounded. It is hard to see in the following picture, but the top right knob is the wiper knob and the bottom left is the throttle knob.



    After that I worked on the shift boot and the front parking/running lights. I waned to glue the boot onto the retainer ring of the shift boot so it would not poke out or leave gaps etc. This took some time as I had to wait for glue to dry and work my way around the ring. So While that was drying I worked on the front lights.

    The front parking lights were loose in the chrome housing so I decided to take them apart to see what was going on. Of course me being me I had to clean paint and rebuild the dang things. The problem ended up being a dried up gasket. I will have to see if I can locate or make them, but I will put it all back together until then.



    Here are the lights in various stages....


Note the old gasket all dried up!








    I painted the inside a sliver I had on hand and found that too dark to be reflective. I went out and purchased a "chrome" paint.





    And here is the shift lever boot ....




Note the ignition switch hanging down... I want to change this out for something more original.


Last but not least ... the new tie rod boots and drag link boots ....









Monday, July 28, 2014

Winding Down On The Front Suspension.

    I finished removing the undercoating from the bumper brackets and shot them both with Rust Reformer. I may paint them glossy tomorrow if  I get bored. They would be fine as is.






    Once those where done I wire wheeled the back side of the bumper to remove the loose rust and shot it with reformer. I do not plan on keeping the old bumpers on the car but I hate rust and they will be used until I can budget new ones.



    That just about does it for the parts and areas for the suspension rebuild. now it is just a waiting game until the idler arm comes in. I did receive this with my last order ......

New turn signal switch!


    I installed it today, but I need to take it back off and make sure I am getting a ground to the column so that the internal indicator lights will work. I will not start hooking up wires until I get the car back on all fours. I do not want to be fooling around it too much while it is up on jack stands.
    I also received a bag of clips that hold the door handles and window cranks on. Someone installed  thin copper(?)  clips in a couple of them but they where not working. Now they are all secure.

    I had just enough time to clean up the garage and hose down and mop the floor. Oh, and I washed the car. I could not stands all of the dust on it from grinding on the parts.



Sunday, July 27, 2014

Here a Shock, There a Shock & a Few Odds & Ends.

   I want to start out with the sway bar bushings. In yesterdays post I stated that I thought they were too small. Well to put them on the sway bar you have to slice one side and slide them over. This takes up the extra space I was seeing on the sides. As far as the gap on the bottom, the cross member has a raised area that the bracket will straddle, taking up the space I was seeing there. I think they will fit just fine!



pic

    I started the day putting the passenger side brakes together. I thought I had a picture of the other side but I do not. Not much to see really. But, please note the new rubber plugs in the adjustment holes ;)




    Then I installed the shocks. I thought this would be a simple task without any cursing ..... I was wrong. Although I got it done, it was not as easy as I had anticipated. Connecting and bolting up the lower shock mount turned out to be a challenge. The old shocks were shot  so I never had trouble bolting up the lower shock mount. The new shocks needed to be compressed to get the nut on the lower shock mount and that was a chore! They look good though!





    After installing the shocks I decided to finish up the clean up on the double nuts (?) for the cross member install. They look pretty good. I think I will go tomorrow and see if I can find all new grade 8 bolts, nuts, and washers for this as well as for the sway bar.




Then I painted this.....  I wont give up the project just yet, but this will be a bitter sweet experience! Can you guess what it goes to?


  

    While that was drying, I tackled the bumper brackets. There was a ton of the factory undercoating on these and that was a pain to remove. I am slowly learning that I should just leave that stuff on and degrease and repaint! I already started the removal so I had to see it through to the end. I am almost there but still have some work to do before painting them. I also took the bumper bracket bolts out of the vinegar. They had been soaking since I removed the bumper.




    I left myself enough time before dinner to finish mowing and came back out after dinner and cleaned up the garage for tomorrow.

Saturday, July 26, 2014

Lay'n Frame ..... Paint.

    As much as I would like to put bags on and lay frame, I'm just laying paint on my frame ... sigh But I'm excited none the less! I actually thought I would have the suspension bolted back under the car by this evening but I remembered I can't put it back on until I have the idler arm installed. The big top bolt on the idler arm won't go in or out of the hole once the cross member is bolted up because of the motor mount.

    I painted and put the driver's side brakes back on the backing plate. I left the inside Rust reformer (flat black) and the outside got the glossy .....






Some new rubber plugs!

 and moved over to the passenger side. I took those apart and wire wheeled and painted the backing plate.



Then I started cleaning up the brake parts for the passenger side. The adjustment caps came out real nice once they soaked in the vinegar for a while. I just had to wipe them out and wash them.....




Brakes are just laying on the backing plate in this photo.


    Once that was done I masked off and painted the frame and radiator support. I shot rust reformer on first and then the glossy. I left the wheel well the flat black.



I seem some rust holes that will need attention down the road!


    When I was shooting the last of it, the mailman pops in with a package! That was fast .. I got my shocks in and the drag link rebuild kit.
    I also got the sway bar bushings but they appear to be too small. I am going to have to look into this.
EDIT: After slitting he bushing to slide over the sway bar it takes up the space pretty good. and there is is a hump where the mount goes to take up the remaining slack. I think it's gonna be fine.




    I immediately took the shocks out , scuffed the pretty black paint and shot them a new color! These shocks and the drum springs should be all that sees the blue. I just wanted a hint here and there. In reality the shock will be the only thing anyone will see since the hub is covered by the tire.






While the shocks dried, I rebuilt the drag link. Nothing to this really, took about 5 mins, if that.  You just unscrew the ends and dump the old parts out then put the new ones in and cap off the ends with the new caps. The first photos are the old cups. You can see the pitting ....




    Here is the new stuff ...

The new cups do not have the grease channel in them like the originals, I guess they are not really needed.


    And installed ...

I would have been nice if the kit included the square rubber grease boot, new grease fittings and cotter pins.

    Tomorrow I will put the brakes back together and install the shocks.